VK-RWR1/2/3
Basalt Mineral Wool
50 / 75 / 100 / 120 / 150 / 200 mm
960 / 1000 mm
Class A · Non-combustible · up to 1000 °C
Rw up to 35 dB
Spun from molten basalt rock at 1500 °C, the mineral wool core is fundamentally inorganic and will not burn, melt or release toxic smoke at temperatures up to 1000 °C. Tested to GB 8624 Class A1 / EN 13501 A2-s1,d0.
Mandatory for buildings over 24 m, public-occupancy structures, oil & gas facilities, lithium battery factories and data centres in most jurisdictions.
Unlike foam cores, mineral wool retains its insulation value through repeated thermal cycles and decades of service — no shrinkage, no off-gassing, no R-value decay.
Fibrous structure absorbs airborne sound, delivering Rw values up to 35 dB — ideal for noisy production halls, music venues and any roof exposed to rain impact.
| Parâmetro | Valor |
|---|---|
| Aspecto da superfície | Prensagem de fitas · Totalmente plana |
| Espessura do aço | 0.4–0.8 mm (outer + inner sheet) |
| Densidade do núcleo | 100 / 120 / 140 kg/m³ |
| Espessura total | 50 / 75 / 100 / 120 / 150 / 200 mm |
| Largura efetiva | 960 / 1000 mm |
| Espessura mm |
Heat Insulation Coefficient K/m²·h·°C |
Surface Load Capacity (P=kg/m²) | |||||
|---|---|---|---|---|---|---|---|
| L | Span configuration | ||||||
| 60 | 80 | 100 | 120 | 150 | |||
| 50 | 0.86 | L= | 2930 | 2740 | 2550 | 2330 | 2060 |
| 80 | 0.54 | L= | 3900 | 3490 | 3190 | 2930 | 2510 |
| 100 | 0.43 | L= | 4350 | 3860 | 3560 | 3230 | 2780 |
VK-GWR
Glass Wool Fibre
50 / 75 / 100 / 120 / 150 mm
960 / 1000 mm
Class A2 · up to 700 °C
PU Side Seal
Spun from molten glass at > 1300 °C, glass wool fibre offers excellent thermal insulation at lower density than rockwool. Class A2 fire rating with low thermal conductivity ~0.035 W/m·K.
Particularly suited to office buildings, conference halls, exhibition centres and other roofs where panel weight reduction is desirable while keeping fire safety strong.
GWR panels feature an integrated polyurethane side seal that closes the cut-edge of the glass wool core, preventing fibre release, water ingress and edge crushing during install — a key advantage over plain mineral wool panels.
Two stock profiles available — single-step trapezoid and double-step low profile — selected by aesthetics or required deflection.
| Parâmetro | Valor |
|---|---|
| Aspecto da superfície | Prensagem de fitas · Totalmente plana |
| Espessura do aço | 0.4–0.8 mm (outer + inner sheet) |
| Densidade do núcleo | 48 / 64 / 80 kg/m³ |
| Espessura total | 50 / 75 / 100 / 120 / 150 / 200 mm |
| Largura efetiva | 960 / 1000 mm |
| Espessura mm |
Heat Insulation Coefficient K/m²·h·°C |
Surface Load Capacity (P=kg/m²) | |||||
|---|---|---|---|---|---|---|---|
| L | Span configuration | ||||||
| 80 | 100 | 120 | 150 | 200 | |||
| 50 | 0.68 | L= | 2950 | 3530 | 3220 | 2880 | 2500 |
| 75 | 0.54 | L= | 4600 | 4110 | 3720 | 3360 | 2910 |
| 100 | 0.43 | L= | 4980 | 4450 | 4080 | 3630 | 3150 |
Nota: Os valores da capacidade de carga superficial representam os limites máximos de deflexão admissíveis. P = carga uniforme (kg/m²); L = vão (mm). Cálculos baseados numa densidade do núcleo de Rockwool de 100–140 kg/m³.
